The cost and reliability of an electronic product are largely determined during board production. SMT assembly sits at the centre of that process, but it is not a single operation — it is a chain of interdependent steps. This article explains what SMT assembly is, how the process runs and what determines quality.
What is SMT assembly?
SMT (Surface Mount Technology) is a production method in which components are mounted on the pads of a PCB. Unlike THT, where leaded components pass through holes, SMT enables smaller components, higher density and automated production. Today most resistors, capacitors, ICs and connectors are assembled with SMT.
The process, step by step
- DFM review: Gerber and BOM files are checked for manufacturability. Pad sizes, component clearances and solder mask issues are identified before production starts.
- Stencil printing: Solder paste is transferred onto the pads through a stencil. Paste thickness and print quality are verified before placement.
- Component placement: Automated machines place components using laser and vision alignment.
- Reflow soldering: The board is soldered in an oven with a controlled temperature profile, determined by board thickness, component mass and paste type.
- AOI inspection: An optical system scans for offset, rotation, missing components and solder defects.
- Test and shipment: X-ray, ICT or functional testing is applied according to project scope, and boards ship in ESD-safe packaging.
What determines quality?
Assembly quality depends on three variables: the right stencil design, the right solder profile and the right inspection plan. The same machine produces poor quality with the wrong stencil or profile. That is why production parameters are re-established and recorded for every project.
IPC-A-610 is used as the acceptance reference. Class 2 defines the solder and workmanship quality commonly expected in commercial and industrial electronics. Handling components in an ESD-controlled area and recording pre- and post-placement checks are equally part of process reliability.
From prototype to serial production
Prototyping aims at validation; serial production aims at repeatability. Running both on the same line with the same control plan reduces the need for re-validation during the transition. With components available, prototype assemblies are typically completed in 5–10 working days and serial production is planned within 2–4 weeks.
To request a manufacturability review and quotation, share your BOM and Gerber files through our contact page.